Juniper EX2200 - Chapter 11 Performing Initial Configuration; EX2200 Switch Default Configuration

Table 35: Unsupported [edit interfaces interface-range] Configuration Statements for EX Series
Switches (continued)
HierarchyStatement
[edit interfaces interface-range unit]clear-don-fragment-bit
[edit interfaces interface-range unit]compression-device
[edit interfaces interface-range unit]copy-tos-to-outer-ip-hearder
[edit interfaces interface-range unit]diable-mlppp-inner-ppp-pfc
[edit interfaces interface-range unit]dlci
[edit interfaces interface-range unit]drop-timeout
[edit interfaces interface-range unit]epd-threshold
[edit interfaces interface-range unit]fragment-threshold
[edit interfaces interface-range unit]input-vlan-map
[edit interfaces interface-range unit]interface-shared-with
[edit interfaces interface-range unit]interleave-fragments
[edit interfaces interface-range unit]inverse-arp
[edit interfaces interface-range unit]layer2-policer
[edit interfaces interface-range unit]link-layer-overhead
[edit interfaces interface-range unit]load-balancing-options
[edit interfaces interface-range unit]mrru
[edit interfaces interface-range unit]multicast-dlci
[edit interfaces interface-range unit]multicast-vci
[edit interfaces interface-range unit]multilink-max-classes
[edit interfaces interface-range unit]multipoint
[edit interfaces interface-range unit]native-inner-vlan-id
[edit interfaces interface-range unit]oam-liveness
[edit interfaces interface-range unit]oam-period
131Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements