Juniper EX2200 Hardware Guide

interfaces {
xe-fpc/pic/port {
accounting-profile name;
description text;
disable;
encapsulation type;
ether-options {
802.3ad {
(backup | primary);
lacp {
force-up;
port-priority number;
}
}
(auto-negotiation | no-auto-negotiation);
ethernet-switch-profile {
tag-protocol-id [tpids];
}
(flow-control | no-flow-control);
(loopback | no-loopback);
}
flexible-vlan-tagging;
(gratuitous-arp-reply | no-gratuitous-arp-reply);
hold-time up milliseconds down milliseconds;
link mode {
full-duplex;
}
mtu bytes;
native-vlan-id
no-gratuitous-arp-request;
traceoptions {
flag flag;
}
(traps | no-traps);
unit logical-unit-number {
accounting-profile name;
bandwidth rate;
description text;
disable;
encapsulation type;
family ccc {
filter {
input filter-name;
output filter-name;
}
policer{
input policer-name;
output policer-name;
}
}
family ethernet-switching {
filter {
input filter-name;
output filter-name;
}
interface-mode (access | trunk) ;
Copyright © 2015, Juniper Networks, Inc.148
Network Interfaces for EX4300 Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g