Juniper EX2200 Hardware Guide

Table 50: show interfaces me0 Output Fields (continued)
Level of OutputField DescriptionField Name
detail extensive noneSNMP index number for the physical interface.SNMP ifIndex
detail extensiveUnique number for use by Juniper Networks technical support only.Generation
brief detail extensiveOptional user-specified description.Description
All levelsInformation about the type of functional interface.Type
All levelsEncapsulation being used on the physical interface.Link-level type
All levelsMaximum transmission unit size on the physical interface. The default is 1514.MTU
detail extensiveInterface that acts as a clock source. This field is not supported on EX Series
switches and the default value is always Unspecified.
Clocking
All levelsSpeed at which the interface is running.Speed
All levelsInformation about the physical device.Device flags
All levelsInformation about the interface.Interface flags
detail extensive noneInformation about whether the link is duplex and whether the negotiation is
manual or automatic.
Link type
detail extensiveInformation about the device dependent physical interface selector. This field
is applied only when a clocking option is specified. This field is not supported
on EX Series switches and the default value is always Unspecified.
Physical info
detail extensiveCurrent interface hold-time up and hold-time down, in milliseconds.Hold-times
detail extensive noneConfigured MAC address.Current address
detail extensive noneMAC address of the hardware.Hardware address
detail extensiveInformation about alternate hardware address.Alternate link
address
detail extensive noneDate, time, and how long ago the interface went from down to up. The format
is Last flapped: year-month-day hour:minute:second timezone
(weeksw:daysdhour:minute:second ago). For example, Last flapped: 2008–01–16
10:52:40 UTC (3w:3d 22:58 ago).
Last flapped
detail extensiveTime when the statistics for the interface was last set to zero. The format is
Last flapped: year-month-day hour:minute:second timezone
(weeksw:daysdhour:minute:second ago). For example, Last flapped: 2008–01–16
10:52:40 UTC (3w:3d 22:58 ago).
Statistics last
cleared
295Copyright © 2015, Juniper Networks, Inc.
Chapter 5: Operational Commands

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g