Juniper SRX650 Hardware Guide

junos-defaults.conf srx210h-poe-factory.conf
junos-factory.conf srx210he-defaults.conf
junos-fips-defaults.conf srx210he-factory.conf
ptx-series-defaults.conf srx210he-poe-defaults.conf
srx100-8xfe-factory.conf srx210he-poe-factory.conf
srx100b-defaults.conf srx210he2-defaults.conf
srx100b-factory.conf srx210he2-factory.conf
srx100h-defaults.conf srx210he2-poe-defaults.conf
srx100h-factory.conf srx210he2-poe-factory.conf
srx100h2-defaults.conf srx220-8xge-factory.conf
srx100h2-factory.conf srx220-poe-8xge-factory.conf
srx110-8xfe-vdsl-factory.conf srx220h-defaults.conf
srx110-8xfe-vdsl-wl-factory.conf srx220h-factory.conf
srx110-8xfe-wl-factory.conf srx220h-poe-defaults.conf
srx110b-defaults.conf srx220h-poe-factory.conf
srx110b-va-defaults.conf srx220h2-defaults.conf
srx110b-va-factory.conf srx220h2-factory.conf
srx110b-vb-defaults.conf srx220h2-poe-defaults.conf
srx110b-vb-factory.conf srx220h2-poe-factory.conf
srx110b-wl-defaults.conf srx240-16xge-factory.conf
srx110b-wl-factory.conf srx240-poe-16xge-factory.conf
srx110h-defaults.conf srx240b-factory.conf
srx110h-va-defaults.conf srx240b2-factory.conf
srx110h-va-factory.conf srx240h-dc-defaults.conf
srx110h-va-wl-defaults.conf srx240h-dc-factory.conf
srx110h-va-wl-factory.conf srx240h-defaults.conf
srx110h-vb-defaults.conf srx240h-factory.conf
srx110h-vb-factory.conf srx240h-poe-defaults.conf
srx110h-vb-wl-defaults.conf srx240h-poe-factory.conf
srx110h-vb-wl-factory.conf srx240h2-dc-defaults.conf
srx110h-wl-defaults.conf srx240h2-dc-factory.conf
srx110h-wl-factory.conf srx240h2-defaults.conf
srx110h2-va-defaults.conf srx240h2-factory.conf
srx110h2-va-factory.conf srx240h2-poe-defaults.conf
srx110h2-vb-defaults.conf srx240h2-poe-factory.conf
srx110h2-vb-factory.conf srx550-6xge-factory.conf
srx210-2xge-6xfe-factory.conf srx550-defaults.conf
srx210-poe-2xge-6xfe-factory.conf srx550-factory.conf
srx210b-defaults.conf srx650-4xge-factory.conf
srx210b-factory.conf srx650-defaults.conf
srx210be-defaults.conf srx650-factory.conf
srx210be-factory.conf
5. View the required default config file.
% vi config file name
For example, enter the following command to view the default configuration file for
the SRX240 Services Gateway.
% vi srx240-poe-16xge-factory.conf
Thefollowingsample output displays the factory-defaultconfigurationon an SRX240
Services Gateway:
##
## $Id: $
##
## Copyright (c) 2009, Juniper Networks, Inc.
## All rights reserved.
##
107Copyright © 2018, Juniper Networks, Inc.
Chapter 19: Performing Initial Configuration

Juniper SRX650 Specifications

General

Brand	Juniper
Model	SRX650
Category	Gateway
Language	English