Juniper SRX650 - 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module; 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Overview

CHAPTER 7
Planning and Preparing the Site
•
Site Preparation Checklist for the SRX650 Services Gateway on page 39
•
General Site Installation Guidelines for the SRX650 Services Gateway on page 41
•
SRX650 Services Gateway Environmental Specifications on page 42
Site Preparation Checklist for the SRX650 Services Gateway
The checklist in Table 10 on page 39 summarizes the tasks you need to perform when
preparing a site for installing the SRX650 Services Gateway.
Table 10: Site Preparation Checklist for SRX650 Services Gateway Installation
NotesDate
Performed
ByAdditional InformationItem or Task
Power
“SRX650 Services
Gateway Electrical Wiring
Guidelines” on page 53
Measure
distance
between
external
power sources
and device
installation
site.
“Grounding the SRX650
Services Gateway” on
page 82
Locate sites
for connection
of system
grounding.
“SRX650 Services
Gateway AC Power
Supply Electrical
Specifications” on
page 56 and “SRX650
Services Gateway DC
Power Supply Electrical
Specifications” on
page 56
Calculate the
power
consumption
and
requirements.
Environment
39Copyright © 2018, Juniper Networks, Inc.