Related
Documentation
Installation Overview for the SRX650 Services Gateway on page 63•
• Installing the SRX650 Services Gateway in a Rack on page 72
• SRX650 Services Gateway Safety Requirements, Warnings, and Guidelines on page166
SRX650 Services Gateway Autoinstallation Overview
Autoinstallation provides automatic configuration for a new services gateway that you
connect to the network and turn on, or for a services gateway configured for
autoinstallation. The autoinstallation process begins whenever a services gateway is
powered on and cannot locate a valid configuration file in the CompactFlash. Typically,
a configuration file is unavailable when a services gateway is powered on for the first
time or if the configuration file is deleted from the CompactFlash. The autoinstallation
feature enables you to deploy multiple services gateways from a central location in the
network.
If you are setting up many services gateways, autoinstallation can help automate the
configuration process by loading configuration files onto new or existing devices
automatically over the network. You can use the CLI to configure a services gateway for
autoinstallation. J-Web does not include pages for the autoinstallation feature.
For the autoinstallation feature to work, you must store one or more host-specific or
default configuration files on a configuration server in the network and have a service
available—typically Dynamic Host Configuration Protocol(DHCP)—to assign an IP address
to the services gateway.
Autoinstallation begins automatically when you connect to Ethernet port ge-0/0/0 on
a new services gateway connected to the network and power on the services gateway.
To simplify the process, you can explicitly enable autoinstallation on a services gateway
and specify a configuration server, an autoinstallation interface, and a protocol for IP
address acquisition.
NOTE: Autoinstallation is enabled on all ports of the services gateway. If you
do not want to use the autoinstallation feature, you must delete it using the
CLI. For more information about the autoinstallation feature, see the Initial
Configuration for Security Devices.
Related
Documentation
• Installation Overview for the SRX650 Services Gateway on page 63
• Required Tools and Parts for Installing the SRX650 Services Gateway on page 63
• Grounding the SRX650 Services Gateway on page 82
• SRX650 Services Gateway Software Configuration Overview on page 97
Copyright © 2018, Juniper Networks, Inc.64
SRX650 Services Gateway Hardware Guide
To Next Page
Loading...
