Juniper SRX650 - Removing the Air Filter on the SRX650 Services Gateway; Figure 26: Removing the Fan Tray from the Services Gateway

Figure 26: Removing the Fan Tray from the Services Gateway
g032715
Related
Documentation
Installing the Fan Tray on the SRX650 Services Gateway on page 73•
• Required Tools and Parts for Replacing Hardware Components on the SRX650 Services
Gateway on page 141
Removing the Air Filter on the SRX650 Services Gateway
NOTE: The SRX650 Services Gateway does not ship with an air filter. An air
filter must be purchased separately.
CAUTION: Exceptduring replacement, always keepthe air filter in placewhile
the services gateway is operating. Because the fans are very powerful, they
could pull small bits of wire or other materials into the device through the
unfiltered air intake. This could damage the components.
Copyright © 2018, Juniper Networks, Inc.152
SRX650 Services Gateway Hardware Guide