Related
Documentation
Required Tools and Parts for Maintaining the SRX650 Services Gateway Hardware
Components on page 123
•
• Maintaining the SRX650 Services Gateway Cooling System Components on page 124
• Maintaining the SRX650 Services Gateway Power Supply on page 124
Maintaining the SRX650 Services Gateway Cooling System Components
The services gateway fan controller works to maintain an optimal temperature for the
services gateway. If the fan controller fails, the services gateway temperature will exceed
the maximum working temperature and it will fail. Make sure that you maintain the
recommended clearances behind the services gateway to enable the fan controller to
function optimally.
Related
Documentation
Required Tools and Parts for Maintaining the SRX650 Services Gateway Hardware
Components on page 123
•
• Routine Maintenance Procedures for the SRX650 Services Gateway on page 123
• SRX650 Services Gateway Environmental Specifications on page 42
• Maintaining the SRX650 Services Gateway Power Supply on page 124
Maintaining the SRX650 Services Gateway Power Supply
To maintain the power supplies of the services gateway:
•
Make sure that all power and grounding cables are arranged so that they do not obstruct
access to other services gateway components.
•
Routinely check the POWER LED on the front panel. If this LED is solid green, the power
supplies are functioning normally.
•
Periodically inspect the site to ensure that the grounding and power cables connected
to the services gateway are securely in place and that there is no moisture accumulating
near the services gateway.
Related
Documentation
• Required Tools and Parts for Maintaining the SRX650 Services Gateway Hardware
Components on page 123
• Routine Maintenance Procedures for the SRX650 Services Gateway on page 123
• Maintaining the SRX650 Services Gateway Cooling System Components on page 124
Copyright © 2018, Juniper Networks, Inc.124
SRX650 Services Gateway Hardware Guide
To Next Page
Loading...
