Table 21: Parts List for a Fully Configured SRX650 Services Gateway
QuantityComponent
12U SRX650 Services Gateway chassis with 8 GPIM slots, 1 SRE slot, and 1 multi-use
processor slot; 2 power supply slots; 1 fan tray with fans; and 4 10/100/1000 base-T
ports. Includes blank covers for GPIM (8 covers for GPIM slots), SRE, multi-use
processor, and power supply slots.
1Front-mount and mid-mount rack-mount kit
1Console cable
1SRX650 Services Gateway Hardware Guide
1SRX650 Services Gateway Getting Started Guide
1Services and Routing Engine 6 (SRE 6) main system board that includes 2 GB DRAM
CompactFlash card
1645 W AC power supply that provides: 390 W system power at 12 V; 255 W PoE
power on a single power supply, or with redundancy using the two power supply
option; and 510 W PoE without redundancy on two power supplies. Works with
90–264 VAC input.
NOTE: The shipment includes one power cord appropriate for your geographical
location.
Two power supplies must be installed in the services gateway for redundancy. A second
power supply and additional power supplies are separately orderable and do not include
the power cord. Additional power cords must be ordered separately.
Table 22: Accessory/Upgrade Parts List for the SRX650 Services Gateway
QuantityPart
1Juniper Networks Product Warranty
1End User License Agreement
1Spare front-mount and mid-mount rack-mount kit
1Spare SRE and multi-use slot blank cover
1Spare power supply slot blank cover
1Spare fan tray with fans
1Air filter (optional)
12 GB DRAM CompactFlash card
1645 W DC power supply with PoE support
67Copyright © 2018, Juniper Networks, Inc.
Chapter 13: Unpacking the Services Gateway
To Next Page
Loading...
Need help?
General
