CHAPTER 1
Introduction
•
SRX650 Services Gateway Description on page 3
•
SRX650 Services Gateway Features and Functions on page 3
•
SRX650 Services Gateway Software Features and Licenses on page 4
•
SRX650 Services Gateway Power over Ethernet Overview on page 8
•
Accessing the SRX650 Services Gateway on page 10
SRX650 Services Gateway Description
The SRX650 is a mid-range dynamic services gateway that consolidates network
infrastructure and security applications for regional offices, large branch offices, and
small to medium enterprises. The services gateway provides cost-effective, scalable
integration of routing, security, and other mid-range applications for these sites.
The SRX650 Services Gateway has a modular 2U chassis that fits a 19-inch rack with a
depth of approximately 18.1 inches. It contains a rear-pluggable Services and Routing
Engine (SRE) module that provides robust performance for mid-range applications,
particularly routing and security services.
Related
Documentation
SRX650 Services Gateway Chassis on page 17•
• Accessing the SRX650 Services Gateway on page 10
• SRX650 Services Gateway Software Features and Licenses on page 4
SRX650 Services Gateway Features and Functions
The SRX650 Services Gateway provides the following features:
•
Symmetric Multiprocessing (SMP)-based data forwarding.
•
Hardware-based control and data plane separation.
•
Four on-board 10/100/1000Base-T Gigabit Ethernet ports.
•
A Services and Routing Engine (SRE) with 2 GB DRAM memory configuration, which
contains the management ports (console and USB) for the services gateway.
3Copyright © 2018, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
