Juniper SRX650 - Overview of Replacing Components; Required Tools and Parts for Replacing Hardware Components on the SRX650; Services Gateway; Table 38: Tools and Parts Required for Replacing Services Gateway Hardware

CHAPTER 22
Overview of Replacing Components
•
Required Tools and Parts for Replacing Hardware Components on the SRX650 Services
Gateway on page 141
Required Tools and Parts for Replacing Hardware Components on the SRX650 Services
Gateway
To replace hardware components, you need the tools and parts listed in
Table 38 on page 141.
Table 38: Tools and Parts Required for Replacing Services Gateway Hardware
Components
ComponentsTool or Part
Cables and connectors3/8 in. nut driver or pliers
Power supply
SRE and multi-use processor
GPIMs
Blank panels (if component is not reinstalled)
SRE
GPIMs
Electrostatic bag or antistatic mat
AllElectrostatic discharge (ESD) grounding wrist
strap
Cables and connectorsFlat-blade (–) screwdriver
Air filter
Cables and connectors
Blank panels
Fan tray
GPIMs
SRE
Phillips (+) screwdrivers, numbers 1 and 2
Cables and connectorsWire cutters
Related
Documentation
• Removing the Fan Tray on the SRX650 Services Gateway on page 151
141Copyright © 2018, Juniper Networks, Inc.