KRONE ISOBUS-Terminal CCI 100
181
Pos: 28.137 /BA/Inf o-Center/CC-ISOBUS- Terminal/CCI-Bi G Pack/Hauptmenüs/Haupt menü 4 Service/Diagnose an aloge Aktoren @ 44\mod_12 75889427562_78.doc @ 393635
Diagnostics analogue actuators
4-4
PWM: 300
I= 0mA
CC000047
Fig. 123
A current (in mA) can be created with the PWM value (in parts per thousand).
With a value of PWM = 500, the current should be between 500 mA and 3000 mA (depending
on the valve that is used and the operating temperature).
• PWM is increased by pressing the function key
• PWM is reduced by pressing the function key
Possible analogue actuators
No. Symbol Description
Y11
Pressure limitation valve
State:
Actuator on
Actuator off
No power supply; fuse is probably defective
Pos: 28.138 /BA/Inf o-Center/CC-ISOBUS- Terminal/CCI-Bi G Pack/Hauptmenüs/ESC drüc ken um Menü Service 4 zu schließen b zw. zum Grundbild zuge langen @ 44\mod_127589353 0687_78.doc @ 393687
• Pressing the function key closes the called up menu
The display shows menu level 4 "Service".
• Pressing the function key
and holding it down brings up the basic screen
Pos: 28.139 /BA/-- ---Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165
To Next Page
Loading...
