Malfunctions - Causes and Remedies
337
Pos: 46.38 /BA/Störunge n - Ursachen und Behebung/ Großpackenpressen/S törungen-Ursac hen-Behebung Doppelkn oter T10 @ 25\mod_1242042811416 _78.doc @ 249692
No
.
Malfunction Cause and/or remedy
12 Shear screw on the needle connecting rod
breaks frequently. As a result the needle
yoke stops.
Cause:
Strong wear of the twine guide eyes.
Remedy:
Exchange the twine guide eyes (1) and replace the shear
screw (2) on the needle connecting rod.
13 The baler can no longer be operated via the
terminal.
Cause:
Faulty operation or faulty connection for
operation.
Remedy:
Unscrew the terminal cable from the socket (1) located to
the left (as seen in direction of travel) on the metal cover
close to the flywheel.
Connect the plug for emergency mode (2) to the socket
(1). After 10 seconds, emergency mode is activated with
the following settings:
• Old nominal length
• Automatic mode
• Last target force to be set
Pos: 46.40 /Überschri ften/Überschri ften 2/F-J/Fehlersuc he in der Zentralschmierung @ 25\ mod_1242052030604_7 8.doc @ 249788
To Next Page
