KRONE operation terminal Gamma
87
Pos: 26.8.10 /BA/I nfo-Center/Großpacken presse/Grundbild Handbetrieb/Anzeige n im Hauptfenster (I V) @ 18\mod_1237379330900_7 8.doc @ 210002
Displays in the main window (IV) (depending on how the machine is equipped)
Current pressing force as a % (100% = max.)
Total number of bales, current customer counter
Current layer thickness in cm or inch (only for electric bale length setting)
Number of layers per bale
Current P.T.O. speed (min
-1
)
Appears briefly after a knot is tied; if it is activated (see chapter menu 1-2
“Knotter signal “) an audio signal is heard (horn sound for about 1 sec).
Direction of travel display
Arrows (1) left/right from the display. The arrows (1) have three different sizes,
numbered with 1-3.
They show the driver the side to which he must correct and how far when
driving over a swath to ensure the bale chamber is filled evenly.
Note
If the indications for the direction of motion are too strong or too weak, they can still be adjusted
(see chapter menu 1-3 “Sensitivity of direction display”).
Pos: 26.8.11 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165
To Next Page
Loading...
