Foreign ISOBUS terminal 11
Varying functions to KRONE ISOBUS terminal 11.2
Comprima V 180
Original Operating Instructions 150001053_00_en 101
11.2 Varying functions to KRONE ISOBUS terminal
The job computer provides information and control functions of the machine on the display of
the external ISOBUS terminal. Operation with an external ISO terminal is similar to the KRONE
ISOBUS terminal. Prior to start-up, refer to the mode of operation of the KRONE ISOBUS
terminal in the operating instructions.
One major difference from the KRONE ISOBUS terminal is the arrangement and number of
keys with functions which are specified by the selected external ISOBUS terminal.
The values for bale diameter (Comprima V) and baling pressure (Comprima F) are set by the
touch function with the third-party ISOBUS terminal, see terminal operating instructions included
with delivery.
To Next Page
Loading...
