Krone Comprima V 180 - Changing Mode; Tying in the Menu Level

13 Terminal menus
13.6 Changing mode
116
Comprima V 180
Original Operating Instructions 150001053_00_en
ð The value is highlighted in colour.
 Press the scroll wheel.
ð An input mask opens.
 Turn the scroll wheel to increase or reduce the value.
 Press scroll wheel to save the value.
Æ The setting is saved and the input mask closes.
Using the value
 Tip the value.
ð An input mask opens.
 Increase or reduce value.
 Press to save the value.
Æ The setting is saved and the input mask closes.
13.6 Changing mode
It is possible to select between different modes in individual menus.
 To select the next mode, press .
 To select the previous mode, press .
 To save, press .
Æ An acoustic signal sounds, the set mode is saved and the icon is briefly displayed in
the upper line.
 To leave the menu, press .
13.7 Tying in the menu level
ü For The menu level is active, refer to page114.