Krone Comprima V 180 - Checking the Retaining Comb for Chamber Film Wrapping

Settings 15
Checking the retaining comb for chamber film wrapping 15.10
Comprima V 180
Original Operating Instructions 150001053_00_en 155
15.10 Checking the retaining comb for chamber film wrapping
For the "Net and chamber film wrapping" version
2
X
3
1
RP000-025
The retaining comb(1) is located on the front of the machine under the storage compartment.
 Check whether the dimension X on the spring on the right side of the machine is X=20mm.
 If the dimension is not X=20mm, set the dimension on the nut(3).