Krone Comprima V 180 - Parking the Machine; Securing the Universal Shaft

14 Driving and transport
14.2 Parking the machine
142
Comprima V 180
Original Operating Instructions 150001053_00_en
ü The bale chamber is empty and the tailgate is closed.
ü The tyres have no cuts and breaks.
ü The tyre pressure is correct, refer to page41.
ü The brake is functioning properly.
ü The permitted maximum speed of the machine is known and is maintained.
ü The road travel screen is open, refer to page106.
14.2 Parking the machine
 Shut down and safeguard the machine, refer to page25.
 Bring the support jack in support position, refer to page70.
 On the tractor side remove the safety chain from the universal shaft, disconnect the
universal shaft and place in the universal shaft chain.
 Disconnect the road lighting plug, refer to page64.
 Remove the power supply cable for the terminal.
 Disconnect the hydraulic hose lines and hook them into the support at the machine.
 Drive the tractor away carefully.
14.3 Securing the universal shaft
If the universal shaft is not connected to the tractor, it must be secured on the drawbar with the
universal shaft retaining chain or with the universal shaft bracket.
With top suspension of the drawbar
3
1
2
1
RP000-485
 Insert the universal shaft(2) into the universal shaft chain(1).
 Attach the universal shaft chain(1) to the support(3).