18 Repairs, maintenance and settings by technicians
226
Comprima V 180
Original Operating Instructions 150001053_00_en
18 Repairs, maintenance and settings by technicians
This chapter describes repair, maintenance and adjustment work on the machine which may be
performed by qualified technicians only. The chapter "Personnel qualification of the technicians"
must be read and observed in full, refer to page15.
WARNING
Risk of injury or damage to the machine due to incorrect repair, maintenance and
setting work.
Machines that are not repaired, maintained or set by technicians can exhibit faults caused by
a lack of knowledge. As a result, people may be seriously injured or killed.
Only an authorised technician may carry out repair, maintenance and setting work at the
machine.
Observe the qualification of technicians, refer to page15.
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
To avoid accidents, the relevant safety instructions must be read and observed, refer to
page14.
WARNING
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
The safety routines must be read and observed to avoid accidents, refer to page25.
To Next Page
Loading...
