KRONE ISOBUS terminal (CCI1200) 10
Setting units on the terminal 10.5
Comprima V 180
Original Operating Instructions 150001053_00_en 99
Main window (3)
Values (figures) shown in blue in the main window can be selected using the touch function.
There are the following main window views:
• Road travel screen
• Working screen/s, refer to page106
• Menu level, refer to page114
10.5 Setting units on the terminal
The units, e.g. metric or imperial, can be set on the terminal in the menu "User settings". This
setting is accepted after the terminal has been restarted as well as for the machine software.
The procedure and other settings can be found in the operating instructions for the terminal.
To Next Page
Loading...
