Krone Comprima V 180 - Technical Data

5 Technical data
40
Comprima V 180
Original Operating Instructions 150001053_00_en
5 Technical data
Dimensions
Width (15.0/55-17, single axle) 2,610 mm
Width (500/50-17, single axle) 2,660 mm
Width (500/55-20 single axle braked) 2,660 mm
Width (500/55-20 single axle non-braked) 2,800 mm
Height (with standard tyres) 3,150 mm
Length 5,295 mm
Weight
1
Weight see information on the type
platerefer to page37
1
Depending on the features of the machine
Track width
Track width 2,150/2,200/2,400 mm
Pick-up
Pick-up width 2,150 mm
Round bales
Size of round bales (diameter) ø 1,000-1,800 mm
Size of round bales (width) 1,200 mm
Net wrapping
Net max. width 1,300 mm
Net sleeve length 1,250-1,330 mm
Net sleeve diameter ø 75-80 mm
Net roll diameter ø max. 310 mm (3,000 m roll)
Chamber film wrapping
Film max. width 1,280 mm
Film sleeve length 1,295 mm
Film sleeve diameter ø 77,3 mm
Film roll diameter ø 225 mm (2,000 m roll)
Minimum requirements for the tractor
Power requirement 40 kW (55 HP)
Drive speed (PTO shaft) 540 rpm
Operating pressure of hydraulic system (min.) 165 bar
Operating pressure of hydraulic system (max.) 200 bar
Max. oil temperature 80 °C
Minimum oil quality Oil ISO VG 46
Delivery capacity hydraulics (min.) 30 L/min
Delivery capacity hydraulics (max.) 60 L/min