Declaration of conformity 23
Comprima V 180
Original Operating Instructions 150001053_00_en 241
23 Declaration of conformity
EC Declaration of Conformity
We
Maschinenfabrik Krone Beteiligungs-GmbH
Heinrich-Krone-Straße 10, D-48480 Spelle
hereby declare, as manufacturer of the product named below, under our sole responsibility, that the
Machine: Round Baler
Type: RP701-40
to which this declaration refers is in compliance with the following relevant provisions:
• EU Directive 2014/30/EU (EMC) The harmonised standard EN ISO 14982:2009 has been applied in
accordance with the directive.
• EC Directive 2006/42/EC (Machinery)
The undersigned Managing Director is authorised to compile the technical documents.
Dr.-Ing. Josef Horstmann
Spelle, 01/08/2017 (Managing Director, Design & Development)
Year of manufacture: Machine no.:
To Next Page
Loading...
