Krone Comprima V 180 - Oils; Lubricating Greases

5 Technical data
5.1 Consumables
42
Comprima V 180
Original Operating Instructions 150001053_00_en
5.1.1 Oils
Designation Filling quantity Specification
T-gearbox main drive 2.00 L SAE 90
Central chain lubrication system 7.00 L SAE 10W-40
5.1.2 Lubricating greases
For the manual lubrication points, a lubricating grease pursuant to DIN51818 of NLGI class2
(lithium soap with EP additives) must be used. KRONE recommends not to use lubricating
greases based on other substances.
The filling quantity depends on the requirements. Lubricate the manual lubrication points until
lubricating grease escapes at the bearing position. After lubrication, remove the grease
escaping from the bearing position.