Krone Comprima V 180 - Checking the Retaining Comb for Net Wrapping

15 Settings
15.9 Checking the retaining comb for net wrapping
154
Comprima V 180
Original Operating Instructions 150001053_00_en
15.9 Checking the retaining comb for net wrapping
For version with "Net wrapping"
1
2
X
3
RP000-186
The retaining comb(1) is located on the front of the machine under the storage compartment.
 Check whether the dimensionX on the spring(2) on the right side of the machine is X=15
mm.
 If the dimension is not X=15 mm, set the dimension on the nut(3).