Krone Comprima V 180 - Menu 1 Number of Net Layers (Net Wrapping)

13 Terminal menus
13.8 Menu1 “Number of net layers” (net wrapping)
118
Comprima V 180
Original Operating Instructions 150001053_00_en
For the "Net and chamber film wrapping" version
Pos. Icon Explanation
1
n
Number of net layers (if ‘net’ has been selected as the type of tying un-
der (3))
n
Number of film layers (if ‘film’ has been selected as the type of tying un-
der (3))
2 Tying start delay net wrapping (if ‘net’ has been selected as the type of
tying under (3))
Tying start delay chamber film wrapping (if ‘film’ has been selected as
the type of tying under (3))
3 Select type of tying (net or film)
13.8 Menu1 “Number of net layers” (net wrapping)
5,0
1,5
2.5
n
1
n
+
-
EQG003-000
ü For The menu level is active, refer to page114.
ü For the “Net and chamber film wrapping” version: Net wrapping is selected in menu 8 “Type
of tying”, refer to page122.
 To open the menu, press
n
.
Æ The display shows menu “Number of net layers”.
Adjusting the number of net layers
 Increase or decrease the value, refer to page115.
 To save the value, press .