Maintenance 16
Servicing the hydraulic system 16.23
Comprima V 180
Original Operating Instructions 150001053_00_en 193
16.23 Servicing the hydraulic system
WARNING
Hydraulic hoses are subject to ageing
Hydraulic hoses may wear depending on pressure, heat load and the effect of UV rays.
People can be seriously injured or killed by damaged hydraulic hoses.
The date of manufacture appears on the hydraulic hoses. This way the age can be
ascertained quickly.
Replacement of the hydraulic hoses is recommended after a lifetime of six years.
Use original spare parts when replacing hoses.
NOTICE
Damage to the machine due to soiling of the hydraulic system
If foreign objects or liquids get into the hydraulic system, the hydraulic system may be
severely damaged.
Clean hydraulic connections and components before removal.
Seal open hydraulic connections with protective caps.
Ensure that foreign objects or liquids do not get into the hydraulic system.
NOTICE
Storing and disposing of oils and used oil filters
If oil and used oil filters are not stored and disposed of properly, the environment may be
damaged.
Store or dispose of used oil and oil filters according to statutory provisions.
16.23.1 Before working on the hydraulic system
RP000-388
The following steps must be performed before working on the hydraulic system:
Completely depressurise the hydraulic system.
Completely unscrew the handwheel(2) on the accumulator connection block(1).
Close the tailgate.
To Next Page
Loading...
