Krone Comprima V 180 - Menu 4 Tying Start Delay (Net Wrapping)

13 Terminal menus
13.11 Menu 4 “Tying start delay” (net wrapping)
120
Comprima V 180
Original Operating Instructions 150001053_00_en
n
+
-
25
0
5
cm
3
EQG003-002
ü For The menu level is active, refer to page114.
 To open the menu, press .
Æ The display shows menu “Advance signalling”.
Setting advance signalling
 Increase or decrease the value, refer to page115.
 To save the value, press .
13.11 Menu 4 “Tying start delay” (net wrapping)
Tying start delay is used to set the period of time which is required between completion of round
bale in the bale chamber and triggering the tying cycle. The tying start delay is set in seconds.
Setting range: 0.0–2.5s
n
+
-
2,5
0,0
0.0
s
4
EQG003-003
ü For The menu level is active, refer to page114.
ü For the “Net and chamber film wrapping” version: Net wrapping is selected in menu 8 “Type
of tying”, refer to page122.
 To open the menu, press .
Æ The display shows menu “Tying start delay”.