Terminal menus 13
Menu 13 "Counters" 13.18
Comprima V 180
Original Operating Instructions 150001053_00_en 127
Icon Explanation
Customer counters 1–20 (the active customer counter is highlighted
in grey)
Total of pressed round bales for the relevant customer
Operating hours counter for the relevant customer
The keys on the sides of the terminal can be used to control the following functions:
Icon Explanation
Increase number of bales
Decrease number of bales
Set individual customer counters to zero
Set all customer counters to zero
Activating customer counter
Use and to navigate to the desired customer counter and activate it with .
Æ The desired customer counter is highlighted in grey.
Changing the number of bales
The number of bales can be changed manually in the customer counter. The respective
customer counter does not have to be activated for this.
Use and to navigate to the desired customer counter.
To increase the number of bales, press .
To reduce the number of bales, press .
Setting customer counters to zero
The respective customer counter does not have to be activated for this.
To set a certain customer counter to zero, use and to navigate to the desired
customer counter and press .
To set all customer counters to zero, press and hold down
for at least 2seconds.
To Next Page
Loading...
