Krone Comprima V 180 - Page 85

Operation 8
Net and chamber film wrapping 8.13
Comprima V 180
Original Operating Instructions 150001053_00_en 85
6
7
5
8
1
12
11
2
3
4
X
9
10
RP000-183
The feed plate(7), which is required to insert the wrapping material, is in the storage
compartment on the right side.
Pre-settings for net wrapping:
• The tension lever(12) must touch and guide the wrapping material roll(1). To do this, the
tension lever(12) must be released, refer to page152.
• The conical roller(3) must be locked to prevent it from rotating during net wrapping, refer to
page153.