Krone Comprima V 180 - Page 92

8 Operation
8.17 Operating the central chain lubrication system
92
Comprima V 180
Original Operating Instructions 150001053_00_en
Pos. Designation
1 Bale formation conveyor drive at rear
2 Roller drive starter roller
3 Roller drive starter roller
4 Spur wheels
5 Intake
6 Intake
7 Pick-up drive
8 Pick-up/auger conveyor
Dosing units on left side of machine
2
3
4
1
RP000-405
The dosing units on the rail on the left side of the machine oil the chains of the following
machine components:
Pos. Designation
1 Bale formation conveyor drive at front
2 Bale formation conveyor drive at front
3 Roller drive feed roller
4 Pick-up/auger conveyor
Setting oil quantity
 Loosen the screws(6).
 Turn the eccentric cam(7) until the arrow is on the required oil quantity.
 Tighten the screws(6).