KRONE operation terminal Gamma
83
Pos: 16.24.46 / BA/Info-Center/Sc hwader/Bedie neinheit - Komf ort/SW 2000/Hau ptmenüs/Haup tmenü 4 Ser vice/Drehwinkelsen sor maximale Arb eitsbreite @ 90\mod_1323250 105060_78. doc@ 769922 @ @ 1
Setting the maximum working width (narrow bar on right)
• Bring the rotor arms into the headland position and extend as far as possible
• In the headland position of the machine, the two bars (2,5) must be inside the marked
area (6) of the bar display.
• Press and hold the rotary potentiometer until the icon (4) appears in the display.
The right bar (5) copies the value of the middle bar (2) and the icon (4) extinguishes in the
display.
Pos: 16.24.47 / BA/Info-Center/S ensoren/Möglich e analoge Sens oren (je nach Ausstattung der Mas chine) @ 19\ mod_1238132 689353_78.doc @ 215041 @ @ 1
Possible analogue sensors (depending on how the machine is equipped)
Pos: 16.24.48 / BA/Info-Center/Sc hwader/Bedie neinheit - Komf ort/SW 2000/Hau ptmenüs/Haup tmenü 4 Ser vice/Mögliche anal oge Sensoren A ufzählung SW 2000 @ 36\mo d_12609752001 21_78.doc @ 337 914 @ @ 1
No. Sensor icon Description
R1 Working width (angle sensor)
Pos: 16.24.49 / BA/Info-Center/S ensoren/Status anzeigen Sens or(0 ,3,4) @ 36\ mod_1261047 764534_78.doc @ 338048 @ @ 1
State:
Sensor OK
Broken cable Short circuit
Pos: 16.24.50 / BA/-----Seitenu mbruch------ @ 0\ mod_11961753 11226_0.doc @ 4165 @ @ 1
To Next Page
Loading...
