2-26
Installing and Setting up the Machine > Quick Setup Wizard
2
Select a function.
3
Configure the Custom Box.
Start the wizard. Follow the instructions on the screen to configure settings.
If you experience difficulty configuring the settings, refer to the following:
Help Screen (3-13)
Item Description
End Exits the wizard. Settings configured so far are applied.
<< Previous Returns to the previous item.
Skip >> Advances to the next item without setting the current item.
Next > Advances to the next screen.
< Back Returns to the previous screen.
Finish Register the settings and exit the wizard.
To Next Page
Loading...
Need help?
General
