9-33
User Authentication and Accounting (User Login, Job Accounting) > Setting an account. [Local]
Setting Processing When the Limit is Exceeded
This specifies how the machine behaves when the counter has reached the limit of restriction.
*1 The next job will be prohibited in sending or in storing in the box.
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 [Job Accounting Settings] > [Default Setting] > [Apply Limit]
2
Configure the settings.
1 Select [Immediately], [Subsequently], or [Alert Only].
2 Select [OK].
Editing an Account
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 [Job Accounting Settings] > [Accounting List]
Item Description
Immediately
*1
Job stops when the counter reaches its limit.
Subsequently Printing/scanning of the job continues but the subsequent job will be rejected.
Alert Only Job continues while displaying an alert message.
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
To Next Page
Loading...
Need help?
General
