2-40
Installing and Setting up the Machine > Installing Software
Installing the WSD Driver
In Windows 8, Windows 8.1, and Microsoft Windows Server 2012
1
From the desktop charms: [Search] > [Control Panel] > [Devices and Printers].
2
Install the driver.
Click [Add a device]. Select the machine's icon and then click [Next].
When the machine's icon is displayed in "Printers" on the "Devices and Printers" screen, the installation is
completed.
In Windows 7
1
Display [Network] in the Start menu.
Click [Start] button on the Windows and then select [Network].
2
Install the driver.
Right-click the machine's icon and then click [Install].
During the installation, double-click the icon shown on the task bar to display the "Driver Software Installation"
screen. When "Your devices are ready to use" is displayed on the [Driver Software Installation] screen, the
installation is completed. Installation is complete when "Your devices are ready to use" is displayed on the [Driver
Software Installation] screen.
In Windows 10
1
In Windows, right-click the start button and then select the following: [Control Panel] >
[Devices and Printers].
2
Install the driver.
Click [Add a device]. Select the machine's icon and then click [Next].
When the machine's icon is displayed in "Printers" on the [Devices and Printers] screen, the installation is
completed.
When [Network] does not appear in the Start menu, perform the following procedure.
1 Right-click [Start] and click [Property] in the menu that appears.
2 Select the [[Start] menu] tab in the "Task bar and [Start] menu properties" screen, and click
[Customize].
3 When the "Customize [Start] menu" screen appears, select the "Network" check box and click [OK].
If the "User Account Control" window appears, click [Continue].
If the "Found New Hardware" window appears, click [Cancel].
To Next Page
Loading...
Need help?
General
