9-46
User Authentication and Accounting (User Login, Job Accounting) > Setting Unknown Number Processing Method
Setting Unknown Number Processing Method
Setting Unknown ID Job Processing
This specifies the behavior for handling the jobs sent with unknown or unsent login user names or User ID. If user login
administration is disabled and job accounting is enabled, the processing method used for an unknown ID job is used.
The table below lists the items to be set.
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 Select [Unknown ID Job].
2
Configure the settings.
Select [Reject] or [Permit].
Registering User Property for an Unknown ID User
When registering user property for an unknown ID user, you can check the user on the Job Status screen or Job Log
screen. Also, you can restrict the available functions.
Item Description
Permit Processes the job.
Reject Does not process the job.
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
This function is displayed when [Unknown ID Job] is set to [Permit].
To Next Page
Loading...
Need help?
General
