11-25
Troubleshooting > Adjustment/Maintenance
Adjustment/Maintenance
Overview of Adjustment/Maintenance
If there is an image problem and the message to run adjustment or maintenance menu appears, run Adjustment/
Maintenance in the system menu.
The table below lists the item you can Procedure.
Color Registration Procedure
Perform the color registration. However, if it is not resolved or to perform more detailed settings, use the manual
registration.
Menu Description Reference Page
Color Registration Perform the color registration. 11-25
Tone Curve Adjustment Adjust the tone curve of the printed image. 11-30
Drum Refresh Remove image blur and white dots from the printout. 11-32
Calibration Using this function enables printing in the most appropriate
color by adjusting hue and color drift in detail.
11-30
Laser Scanner Cleaning Remove vertical lines from the printout. 11-30
Before performing color registration, be sure to perform Calibration. If color drift remains, perform color
registration. By performing color registration without performing Calibration, the color drift will be resolved once,
however, it may cause the serious color drift later.
To Next Page
Loading...
Need help?
General
