9-11
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
4
Select [Save].
A new user is added on the local user list.
Change the user properties
User properties can be changed. Types of user properties that could be changed may be different depending on user
access privilege.
For a user with Administrator rights who logs in
User properties can be changed and users can be deleted. The items, which can be added, are all able to be changed.
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 [User Login Settings] > [Local User List]
2
Change the user properties.
Changing user properties
If simple login is enabled, a confirmation screen appears when new registration is finished asking if you will
configure simple login settings. To configure simple login settings, select [Yes]. If you select [No], you will return
to the user list screen.
For the procedure for configuring simple login settings, refer to the following:
Simple Login Settings (9-23)
To change the user information of the machine administrator, you must log in with machine administrator
authority. You can only view user information if you log in as a regular user.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
To Next Page
Loading...
Need help?
General
