3-43
Preparation before Use > Recalling Frequently Used Functions (Favorites)
6 Check the content. Change or add information as needed.
*1 If user login administration is enabled, you can only change settings by logging in with administrator privileges.
*2 Displayed when user login administration is enabled.
*3 Displayed when the "Job Type" setting is [Send] or [FAX].
7 Select [Register].
This adds the favorite.
8 "Do you want to add a new function to the home screen?" screen appears. To display a favorite to the Home
screen, select [Yes], specify the location where you want to display the icon of the favorite, and then select
[Save].
Adding to Favorites in Program Mode
If you are planning to select the Program Mode, first configure the copy function, transmission function, FAX function,
send destination, and/or other settings to be added to Favorites.
1
Display a screen.
1 [Home] key > [Send]
2 This configures send function and/or destination settings to be registered in a program.
3 Select [Favorites].
2
Adds Favorites.
1 [Menu] > [Add]
2 Select the job type.
3 Select [Program].
4 Enter a name for the favorite. > [Next >]
Character Entry Method (12-11)
Item Description
Name Enter up to 32 characters for the name that appears on the Favorites screen.
Add - Job Type Shows the type of the selected job.
Number
*1
Enter a number for the favorite.
If you specify "00" as the address number, the address is added under the lowest available
number.
Owner
*2
Shows the user.
Permission
*2
Specifies whether favorites should be shared with other users.
Destination
*3
Checks a destination.
Functions Use the Wizard to select the displayed functions.
Function Type Selects the method used to recall favorites.
To Next Page
Loading...
Need help?
General
