Kyocera Ecosys M812cidn User Manual

9-22
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
3
Registering
Select [Save].
Obtain NW User Property
Set the required information to obtain the network user property from the LDAP server. The user name and E-mail
address obtained with this setting is shown in the user information, the status confirmation screen, and the header of E-
mail.
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 [User Login Settings] > [Obtain NW User Property] > [On]
2
Configure the settings.
Add information on each item > [OK]
*1 If using Active Directory of Windows, the server name may be the same as the server name entered in the network au-
NOTE
To obtain the network user property from the LDAP server, [Network Authentication] must be selected for the
authentication method in "User Login Settings". Select "On" for "LDAP" in "Protocol Settings".
Enabling User Login Administration (9-5)
LDAP (8-43)
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Item Description
Server Name
*1
Enter the LDAP server name or the IP address (up to 64 characters). If a server name is not
entered, user information will be acquired from the server set for Network Authentication.
Port Port number for LDAP server. The default port number is 389.
Name 1
*2
Enter the LDAP Attribute to obtain the user name to be displayed from the LDAP server (up to
32 characters).
Name 2
*3
E-mail Address
*4
Enter the LDAP Attribute to obtain the E-mail address from the LDAP server (up to 128
characters).
Authentication Type
*5
Set the authentication method. Select [Simple] or [SASL]. After changing the setting, restart
the system or turn the power off and then on.
Search Timeout Set the amount of time to wait before time-out in seconds (from 5 to 255 seconds).
LDAP Security (User
Property)
Select the type of encryption according to the type of security employed by the LDAP server.
The value is [Off], [SSL/TLS] or [STARTTLS].

Kyocera Ecosys M812cidn Specifications

General

Brand	Kyocera
Model	Ecosys M812cidn
Category	All in One Printer
Language	English