9-35
User Authentication and Accounting (User Login, Job Accounting) > Setting an account. [Local]
1
Display the screen.
1 From the desktop, click [Settings] in charms, [Control Panel], and then [Devices and Printers].
2 Right-click the printer driver icon of the machine, and click the [Printer properties] menu of the printer driver.
3 Click [Administrator] on the [Device Settings] tab.
2
Configure the settings.
1 Select [Job accounting] on the [Job Accounting] tab.
2 Set the Job Accounting.
[Use specific account ID]: Enter the Account ID. Printing will be performed using the entered Account ID. If this option is
selected, the user does not have to enter the Account ID for each print job.
[Prompt for account ID]: A screen for entering the Account ID will be displayed when attempting a printing. The Account ID
must be entered each time a printing is attempted.
[Prompt for account ID and validate]: A screen for entering the Account ID will be displayed when attempting a printing. The
Account ID stored in the Account ID list needs to be entered. The Account ID must be entered each time a printing is
attempted.
[Display account ID list]: The Account ID list is displayed when printing. The Account ID to be used needs to be selected
from the list.
[Validate account ID for each user (host)]: When printing, the Windows user name is searched in the "Account ID list" and
printing is possible if the name is registered. If the user is not registered, a screen for entering the account ID is displayed.
3 Click [OK].
Job Accounting for Scan Using TWAIN
To manage the number of jobs scanned by using TWAIN, you need to configure the following settings by using the
TWAIN Driver on the computer. Instructions are based on interface elements as they appear in Windows 8.1.
In Windows 7, click the [Start] button in Windows, and then click [Devices and Printers].
For other settings of job accounting, refer to the following:
Printer Driver User Guide
To Next Page
Loading...
Need help?
General
