2-39
Installing and Setting up the Machine > Installing Software
Setting WIA Driver
Instructions are based on interface elements as they appear in Windows 8.1.
1
Display the screen.
1 Click [Search] in desktop charms, and enter "View scanners and cameras" in the search box. Select [View
scanners and cameras] in the search list and then the Scanners and Cameras screen appears.
2 Select the same name as this machine from WIA Drivers, and click [Properties].
2
Configure the settings.
In Windows 7, click [Start] button on the Windows and enter "Scanner" in [Program and File Search]. Click [View
scanners and cameras] in the search list and then the Scanners and Cameras screen appears.
1 Click the [Settings] tab.
2 Enter the machine IP addresses or host name.
3 When using SSL, select the checkbox beside SSL.
4 Set units of measurement.
5 Click [OK].
To Next Page
Loading...
