9-20
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Guest Authorization Set
When User Login Administration is enabled, set the functions that guest users who cannot log in to the machine are
allowed to use.
Enabling Guest Authorization
Enable the guest authorization.
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 [User Login Settings] > [Guest Authorization Set.] > [Guest Authorization]
2
Configure the settings.
Select [Off] or [On].
Configuring Guest Property
Register guest user information and functions that are restricted.
To use Guest Authorization Set., User Login Administration must be enabled in "User Login Settings".
Enabling User Login Administration (9-5)
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
If the guest authorization setting is enabled, the [Authentication / Logout] key must be selected when logging in.
In the guest user default settings, only monochrome copying can be used. If you wish to use a different function,
log in as a user who can use that function, or change the settings in the guest properties.
To Next Page
Loading...
Need help?
General
