8-21
System Menu > [Common Settings]
[Offset One Page Documents]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Offset One Page Documents]
[Display Status/Log]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Display Status/Log]
Set the display method of the Status/Log.
*1 Displayed only on products with the fax function installed.
[Function Key Assignment]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Function Key Assignment]
Assigns a function to each function key.
*1 Displayed when the external server (FAX server) is set.
*2 Displayed only on products with the fax function installed.
*3 Displayed when the product is equipped with an optional large capacity storage device (SSD).
*4 The registered application name is displayed.
[Show Power Off Message]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Show Power Off Message]
Item Description
Offset One Page Documents Set whether one-page documents are sorted.
Value: Off, On
This function is displayed when an optional Document Finisher is installed.
Item Description
Display Jobs Detail Status Value: Show All, My Jobs Only, Hide All
Display Jobs Log Value: Show All, My Jobs Only, Hide All
Display FAX Log
*1
Value: Show All, Hide All
Item Description
Function Key 1 Value: None, Copy, Send, FAX Server
*1
, FAX
*2
, Custom Box
*3
Job Box, Removable
Memory, Sub Address Box
*2
, Polling Box
*2
, FAX Memory RX Box
*2
, ID Card Copy,
Paper Saving Copy, Simple Folder Send (Destination Entry), Simple Folder Send
(Address Book), Simple Email Send (Destination Entry), Simple Email Send (Address
Book), Application
*4
You can select the function to display by selecting [Menu] > [Narrow Down] or from the
pull-down menu, by selecting [All], [Application], [Favorites], [Others] to display the
function.
Function Key 2
Function Key 3
Item Description
Show Power Off Message Set the mode whether display a confirmation message in power supply off.
Value: Off, On