5-24
Operation on the Machine > Useful Sending Method
1
Select [Home] key.
2
Select [Send to Me(E-mail)].
Using a FAX Server to Send (FAX Server Send)
You can send a scanned document via a fax server.
1
[Home] key > [Send]
2
Place the originals.
Place the Originals. (5-3)
3
On the basic screen for sending, select [FAX Server].
4
Enter recipient information.
Entering Information Directly
1 Select [Enter FAX Number].
2 Enter the fax number.
3 Select [OK].
Destinations can be changed later.
Checking and Editing Destinations (5-30)
Selecting from the Address Book
1 Select [Address Book].
2 Specify the destination.
Choosing from the Address Book (5-27)
• A fax server is required to use this function. For information about the fax server, contact the applicable
administrator.
• FAX server settings must be configured to send a FAX.
Command Center RX User Guide
[FAX Server Settings] (8-57)
Use the numeric keys to enter a number.
To Next Page
Loading...
Need help?
General
