2-35
Installing and Setting up the Machine > Installing Software
Installing Software on a Mac Computer
The machine's printer functionality can be used by a Mac computer.
1
Insert the DVD.
Double-click the [Kyocera] icon.
2
Display the screen.
Double-click [ OS X x.x] depending on your Mac OS version.
3
Install the software.
Install the printer driver as directed by the instructions in the installation software.
This completes the printer driver installation.
If a USB connection is used, the machine is automatically recognized and connected. If an IP connection is used,
the settings below are required.
• Installation on Mac OS must be done by a user logged on with administrator privileges.
• When installing software on a Mac computer, set the machine's emulation to [KPDL] or [KPDL(Auto)].
[Printer] (8-31)
• If connecting by Bonjour, enable Bonjour in the machine's network settings.
[Bonjour] (8-41)
• In the Authenticate screen, enter the name and password used to log in to the operating system.
• When printing via AirPrint, you do not have to install the software.
To Next Page
Loading...
