Kyocera Ecosys M812cidn

8-3
System Menu > [Quick Setup Wizard]
[Quick Setup Wizard]
For FAX functions, Energy Saver functions and network settings, the following settings can be configured in a wizard-
style screen.
Quick Setup Wizard (2-25)
The following settings can be configured in a wizard-style screen.
*1 This function is displayed when [Network Selection] is set to [Wired Network].
*2 This function is not displayed when [On] is selected for the DHCP setting.
Function Item Description
FAX Setup Configures basic fax settings. FAX functions are available only on products with the fax
function installed.
FAX Operation Guide
Energy Saver Setup Configures energy saver function settings
1. Sleep Mode Sleep Timer
Sleep Level (models except for Europe)
2. Low Power Mode Low Power Timer
Network Setup 1. Network Wi-Fi
Wired Network
DHCP
*1
IP Address
*2
Subnet Mask
*2
Default Gateway
*2
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000