Kyocera Ecosys M812cidn User Manual

2-25
Installing and Setting up the Machine > Quick Setup Wizard
Quick Setup Wizard
The Machine Setup Wizard is launched when the equipment is turned on for the first time after being installed. Before
using this machine, configure such settings as date and time, network configuration, and energy saving functions as
needed.
The following settings can be configured in a wizard-style screen.
*1 This function is displayed when the Wireless Network Interface Kit (IB-36) is installed.
The Wireless Network Interface Kit is an option for some models. Contact your dealer or our sales or service representa-
tives for detail.
IB-36 <Wireless Network Interface Kit> (12-3)
*2 This function is displayed when [Network Selection] is set to [Wi-Fi].
*3 This function is displayed when [Network Selection] is set to [Wired Network].
*4 This function is displayed when [DHCP] is set to [On].
1
Display the screen.
[System Menu / Counter] key > [Quick Setup Wizard]
NOTE
The default settings of the machine can be changed in System Menu.
For settings that are configurable from System Menu, refer to the following:
System Menu (8-1)
Function Item Description
FAX Setup Configures basic fax settings. FAX functions are available only on products with the fax
function installed.
FAX Operation Guide
Energy Saver Setup Configures energy saver function settings.
1. Sleep Mode Sleep Timer
Sleep Level (models except for Europe)
2. Low Power Mode Low Power Timer
Network Setup 1. Network Network Selection
*1
Wi-Fi
*2
DHCP
*3
IP Address
*4
Subnet Mask
*4
Default Gateway
*4
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000

Kyocera Ecosys M812cidn Specifications

General

Brand	Kyocera
Model	Ecosys M812cidn
Category	All in One Printer
Language	English