9-17
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
3 Click [OK].
Local Authorization Settings
Select whether or not to use Local Authorization.
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 [User Login Settings] > [Local User Authorization]
2
Configure the settings.
Select [Off] or [On].
Group Authorization Settings
Set restrictions of the machine usage by each individual group registered in the authentication server.
Group Authorization
Use the group authorization.
When using Local Authorization, the user authentication type must be set to [Local Authentication].
Enabling User Login Administration (9-5)
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
To use the group authorization settings, [Network Authentication] must be selected for the authentication
method in "User Login Settings". Select "On" for "LDAP" in "Protocol Settings".
Enabling User Login Administration (9-5)
LDAP (8-43)
To Next Page
Loading...
Need help?
General
