5-7
Operation on the Machine > Loading Paper in the Multi Purpose Tray
Loading Paper in the Multi Purpose Tray
For details of the supported paper sizes, refer to the following:
Paper Appropriate Paper (12-14)
For the paper type setting, refer to the following:
Media Type Setting (8-14)
Be sure to use the multi purpose tray when you print on any special paper.
The capacity of the multi purpose tray is as follows.
• A4 or smaller plain paper (80 g/m
2
), recycled paper or color paper: 100 sheets
• Thick paper (220 g/m
2
): 10 sheets
• Thick paper (157 g/m
2
): 10 sheets
• Thick paper (120 g/m
2
): 25 sheets
• Thick paper (104.7 g/m
2
): 25 sheets
• A4 or smaller plain paper (80 g/m
2
), recycled paper or color paper: 25 sheets
• Hagaki (Cardstock): 20 sheets
• Envelope DL, Envelope C5, Envelope #10(Commercial#10), Envelope Monarch, Youkei 4, Youkei 2: 5 sheets
• OHP film: 10 sheet
1
Open the multi purpose tray.
• If you are using a paper weight of 106 g/m
2
or more, set the media type to Thick and set the weight of
the paper you are using.
• Remove each transparency from the inner tray as it is printed. Leaving transparencies in the inner
tray may cause a paper jam.
• When you load custom size paper, enter the paper size by referring to the following:
[Multi Purpose Tray] (8-10)
• When you use special paper such as transparencies or thick paper, select the media type by referring to the
following:
Media Type Setting (8-14)
To Next Page
Loading...
Need help?
General
