5-8
Operation on the Machine > Loading Paper in the Multi Purpose Tray
2
Adjust the multi purpose tray size.
Paper sizes are marked on the multi purpose tray.
3
Load paper.
Insert the paper along the paper width guides into the tray until it stops.
After removing new paper from its packaging, fan the paper before loading it in the multi purpose tray.
Precaution for Loading Paper (3-17)
4
Specify the type of paper loaded in the multi purpose tray using the operation panel.
[Multi Purpose Tray] (8-10)
• When loading the paper, keep the print side facing down.
• Curled paper must be uncurled before use.
• When loading paper into the multi purpose tray, check that there is no paper left over in the tray from
a previous job before loading the paper. If there is just a small amount of paper left over in the multi
purpose tray and you want to add more, first remove the left-over paper from the tray and include it
with the new paper before loading the paper back into the tray.
• If there is a gap between the paper and the paper width guides, readjust the guides to fit the paper in
order to prevent skewed feeding and paper jams.
To Next Page
Loading...
Need help?
General
